วิธีการติดตั้งทั่วไปของ Geotextile Composite Geomembrane
As the key medium of the anti-seepage structure, the geomembrane layer should meet the stress requirements during installation, because the leak control effect of geomembrane is related to its strength and thickness. Therefore, choose the appropriate thickness according to the design stress.
![geotextile composite geomembrane](http://v4-upload.goalsites.com/381/image_1572847060_geotextile-composite-material.png)
![one geomembrane two geotextiles](http://v4-upload.goalsites.com/381/image_1572241605_geomembrane-geotextile-composite.jpg)
The geomembrane คอมโพสิต geotextile heated with geotextile on one side or two sides has the features of high overall strength, tear resistance, anti-breaking and anti-piercing ability. The geotextile compounded on the membrane surface has supported and protected abilities.
For the leak control structure utilized with composite geomembrane, in general, the support layer and the protection layer can be simplified. For example, this geotextile composite geomembrane can be directly laid before the placement of concrete facing surface or the protective surface composed of the gravel cushion and the concrete slab. After laying this composite geomembrane, the medium coarse sand cushion can be directly laid.
The phenomenon that geotextile composite geomembrane is punctured is caused by the unenven subgrade, so it is important to prepare and maintain the civil works of subgrade.
General geotextile composite จีโอเมมเบรน installation method:
ประการแรกการรักษาระดับล่าง
Subgrade should be prepared according to the design requirements, which is the key to ensuring the leak control performance. The substances including sharp stones, roots and other foreign subjects should be thoroughly removed, and subgrade is not allowed to be uneven. The prepared and maitained subgrade should be compacted by a tamper or a seesaw.
ประการที่สอง การวาง
เมื่อวาง geomembrane คอมโพสิตผ้าใยสังเคราะห์จะต้องวางจากบนลงล่าง การทับซ้อนกันระหว่าง geocomposites และระหว่าง geomembrane และชั้นล่างควรแบนและแน่น แต่ไม่ควรดึงแน่นเกินไปโดยทั่วไปควรหลวมเล็กน้อย ควรป้องกันฟองอากาศจากด้านล่าง เนื่องจาก geomembrane คอมโพสิต geotextile ค่อนข้างบางและเบา จึงง่ายต่อการพัดด้วยลมก่อนที่จะวางชั้นป้องกัน ดังนั้นไม่ควรใช้ geomembrane คอมโพสิตผ้าใยสังเคราะห์กับพื้นที่ขนาดใหญ่ในคราวเดียว วางชั้นป้องกันของดินเมื่อวาง geocomposite อย่างดี
ประการที่สามร่วม
The joint has three methods of hot-melt welding, gluing and compacting, wherein the hot-melt welding has the best waterproof effect.
เซี่ยงไฮ้ Yingfan Environmental Engineering Co., Ltd.